How to flash firmware and custom recovery TWRP on Lenovo S858t

How to flash firmware and custom recovery TWRP on Lenovo S858t

Instructions on firmware Lenovo s858t russifitsirovanuyu smartphone to a new firmware version (Android OS) and the installation of a custom recovery TWRP using the program SP Flash Tool.

The very first thing, before any manipulation with Lenovo s858t phone, you must charge it (preferably up to 100%). Well, and then downloaded onto a PC all the necessary firmware for your smartphone:

Download and install the drivers for the communication of your PC with your smartphone.

MTK65xx_Driver ,    the Lenovo Usb Driver 1.0.12 the autorun

Download the firmware itself in the format for SP Flash Tool and extract the archive to a folder target_bin. The path to the firmware should be no Russian Chinese and other non-Latin characters!

S858T_USR_S017_ 1410112350_多国语言_JY02_2015

S858T_302_RU.7z




Download and unpack firmware program for the Lenovo s858  the SP the Flash Tool will . Do not chase the latest version, it is recommended to use version (new is not always better). On the way to the program should be Russian Chinese and other non-Latin characters!

Start the SP Flash Tool.exe as an administrator, click Scatter-loading button and choose the folder MT6532_Android_scatter_emmc.txt firmware. It is also important that the regime was exposed and Download Only not been jackdaws in preloader bar.

SP Flash Tool

Disconnect the phone from the PC and click the Download button. Turn off the phone.

We connect with a USB cable to a computer smartphone. If something does not work and the SP Flash Tool can not see the device, try to connect your smartphone to your computer to remove the battery and insert it back, and connect the USB-cable from the back panel of the system unit.
You should now see how to Flash Tool ran bottom line download. (It is important to touch the phone while loading line is filled completely and you will not see a window «Download Ok»).

SP Flash Tool v5.1452

That’s all, Lenovo s858t phone firmware process is complete, you can disconnect your phone and turn it on. The first boot usually takes much longer than usual.

Installation of a custom rekaveri TWRP on Lenovo S858t

And so, download the drivers for the above communication Lenovo s858t smartphone with your PC and SP Flash Tool (if you have not done so).
Then download the file with custom recovery TWRP 2.8.6.0 Lenovo s858t  and unpack files.

Install all the drivers on your PC and run the firmware program SP Flash Tool click the button with the inscription Scatter-loading point to Android_scatter file (in the folder previously downloaded our firmware)

Points to our image downloaded TWRP, a tick should be only against the «Recovery» line in the end should turn out like this

SP Flash Tool v5.1452

To verify the correctness of all the done push on the options button and go to download tab, where the presence of a tick check at the point of da dl all with checksum. If the check mark at the site, close the window with the settings and click on the big green arrow with the word «Download», then take out the battery and connect it to your PC from your phone, immediately after the connection should automatically start the process of firmware.

At the end of the firmware disconnect the phone from the PC and insert the battery at the same time stifle the sound of key up and down (and keep them) and press the power key (and keep to vibration), release the power button. When you see the TWRP image on screen release the button sound, well, here we are in TWRP menu.




Follow

Get every new post delivered to your Inbox

Join other followers