Instructions for insertion of the smartphone Samsung SM-N910C Galaxy Note 4 to the original or a custom firmware, the new version of Android, obtaining root access Root on the phone Samsung Galaxy Note 4.
How to flash the Samsung SM-N910C Galaxy Note 4? exist several ways firmware of the smartphone, in this article I will tell you how to flash the Samsung Galaxy Note 4 to the official original firmware using software Odin. And the way the firmware to the phone Samsung Galaxy Note 4 custom firmware with the help of a custom recovery without having Root.
Before flashing gadget sure to disable the lock re-activation, the phone is not locked. To do this, go to «Settings» there select the item «Security» and remove the check mark from the «Lock to reactivate.» If the data is encrypted on the device, it is necessary to fully decipher them, or after the firmware, you will not be able to restore access.
1. Single official firmware
Before firmware required to fully charge your phone, check whether or not the cable is damaged through which you sew your Galaxy Note 4, Kies and offices are closed on your PC.
Be sure to first read these instructions for firmware Samsung SM-N910C Galaxy Note 4 to the end, and only then proceed to the firmware of your «pet».
And so the first thing to do is to download and install on your PC the communication driver phone with your PC — Drivers, and then download the program itself programmer — Odin3 v1.85
Next, you should download the firmware you liked — N910CXXU1COH4 All Android 5.1.1, N910CXXU1BOE1 All Android 5.0.1
Samsung Galaxy Note 4 N910 Film
Call the Task Manager and stop all processes with the word «Kies». Run the program Odin 3 1.85 as administrator and see the following screen:
Push the button PDA (or «AP») and select the TAR file from the folder where we put the firmware download, and set all the check as shown in the screenshot below. The archive may be in addition to the firmware file SS_DL.dll — do not believe it — it is the remainder of Kies (garbage).
Enter a smartphone to download mode.
To do this, turn off the smart phone and then the phone off hold down both the Volume Down + on. + Home, and then confirms the desire to flash by pressing the Volume Up should see a green robot with the word «Downloading …» and connect the smartphone to a PC via the provided USB cable. In the top left corner lights up in blue box with an inscription ID: COM — is a PC recognized your smartphone.
Push the button START, and then start the process of firmware. In no case can not interrupt the firmware — get high-tech brick. Usually, the process takes minutes, 4 — 5, it all depends on your computer. In the process of firmware smart phone will reboot on their own, waiting until it appears «RESET!»
That’s all you re flashed a Samsung SM-N910C Galaxy Note 4 to the new official firmware.
2. Instructions for custom firmware on Samsung Galaxy Note 4
Custom firmware almost completely similar to the original firmware, but the truth is, with some additions, which we will discuss in detail below.
And so, for a start you need to install custom rekaveri TWRP Recovery on your smartphone. To do this, download the file TWRP Recovery.
Then we obtain from the archive file with the extension .tar and sewn using ODIN it under the first paragraph of this manual (official firmware), the difference is that in the PDA does not insert the firmware, and our custom rekaveri.
It is also important in the firmware of a custom recovery without the Root, when you reboot your smartphone recovering stock recovery, because you need to flash a custom recovery by removing check Auto reboot the program Odin 3, after the firmware of a custom recovery turn off your Samsung SM-N910C Galaxy Note 4 by hand (directly mode Download, disconnecting from the computer), then from the off state to switch to Recovery (three buttons)). After the CF-Auto-Root is already irrelevant, recovery is nailed stock rekoveri.
Next you need to download the custom firmware and copy it to a memory card SD, it is best not to bother with folders and throw the firmware to the root folder.
Samu firmware can be downloaded — nprimer TeamEOS, AllianceROM or firmware catalog — Needrom
Samsung Galaxy Note N910 4
Then we go to custom rekaveri. To do this, turn off the device and hold keys simultaneously Nutrition, Home and Volume Up (Volume Up).
Deletes all data on the device (optional). In rekaveri select Wipe date / factory Reset -> Yes — Wipe all user data.
Go to Wipe cache parition and select Yes -> Wipe cache partition.
Go to the Advanced -> Wipe dalvik cache -> Yes — Wipe dalvik cache.
Go to Mount and Storage and format partitions: / boot / cache / system / data pass to Install Zip -> Chose zip from storage / sdcard1 (Or chose zip from external sdcard depending on rekaveri), choose the previously copied the firmware to the memory card, select Yes — install, start the firmware installation. After installing the firmware, in rekaveri select Reboot system now and begin to restart the device.
Done! You have successfully flashed custom firmware!
3. Obtaining Root rights with CWM Recovery on Samsung Galaxy Note 4 N910C
Warning, this method will affect the counter Knox, it will be 0x1
This method assumes that you already have Odin and you know how to use it (see instructions above). Just getting Root right this way it is not required to update from Google Play.
Download the archive Beta SuperSU v2.49, copy the file to the phone’s memory card (or internal memory, it does not matter), set custom №2 Recovery from this manual.
Then reboot into Recovery in the usual way and set our archive. Go to the Install Zip -> Chose from zip storage / sdcard1 (Or chose zip from external sdcard depending on rekaveri), select the memory card «Beta SuperSU v2.49» and click nanego Yes — install, start the installation file.
Phone Samsung Galaxy Note 4 N910C reboot with the resultant Root.