Instructions for insertion of the smartphone Samsung Galaxy S7 SM-G930 in the new official or custom firmware. Getting root permissions on the Root Samsung Galaxy S7 SM-G930, the installation of a custom TWRP recovery.
How to flash Samsung Galaxy S7 SM-G930 to the official firmware using firmware program Odin? In order to install the new firmware on your smartphone first need to download several files on your PC:
Drivers – the SAMSUNG the USB Driver
firmware flashing program – Odin Odin
Then you need to download the firmware for the Samsung Galaxy S7 SM-G930 any that you enjoy, such as:
official – the Samsung firmwares the Database
informal – TEKXnesis_Hybri d_S7_6.0.1 | the S7 Rom | KryxxOS-R1.2
SM-G930R4 (US Cellular)
Once you have downloaded, unpack the archive with the driver for the Samsung Galaxy S7 SM-G930 and install it. Then, unpack the archive with the firmware and Odin.
Run the program for the Galaxy S7 Odin firmware administrator. To do this, move the cursor to Odin and the right mouse button and select “Run as administrator”, then click “Yes” .
After the launch Odin, we arrange the firmware files in the following order:
the BL ………. tar.md5 file into a field «BL»
File AP ………. tar.md5 inserted into field «AP»
File CP ………. tar.md5 inserted in the «CP»
File CSC …….. tar.md5 inserted in the «CSC»
We check to “show” were only in the fields of “Auto Reboot” and “F. Reset Time”
Switch the phone Samsung Galaxy S7 SM-G930 in the flashing mode. To do this, turn off your phone and then press and hold “Volume Down” button “Home” and “Power” button and then the menu is displayed with a yellow triangle we press the button “Volume up”
Connect the smartphone using the included USB cable to a PC and the program of Odin in the upper left corner should sign “COM” illuminated blue background appears, and then press the button «Start».
Note: If you have, for whatever reasons, the PC does not recognize your device, try reinstalling the driver and / or try another USB port.
Firmware smartphone Process launched. After successful firmware, reboot the device automatically and “Finish” appears in Odin program. That’s all!
Installation instructions of a custom TWRP recovery on Samsung Galaxy S7 (SM-G930)
For the installation of a custom rekaveri of Recovery TWRP on your smartphone Samsung Galaxy S7 SM-G930 first need to download the USB-driver and install them – the SAMSUNG the USB Driver (if you have not done it ische).
Download and unzip the firmware program – Odin Odin
Download the latest version of TWRP SM- G930F (herolte) from this repository TWRP SG S7 in .img format (Image) / .img.tar (Odin’s program)
in your smartphone settings include “debugging USB” ( “USB debugging”) + The enable OEMs in the settings section ” developers “, which in turn opens if you press 7-10 times to select” build Number “(” build Number “) in the settings section” About phone ”
and then shuts down your smartphone and go to the flashing mode” Download mode “, for this purpose on off phone, hold both “turn down the volume”, “Home” button and the “Power”.
Before you visit in flashing mode the phone will issue a “Warning”, click “volume +” to skip.
Connect your phone Samsung Galaxy S7 SM-G930 to your computer . using a standard USB-cable
Launch Odin (previously downloaded and unpacked) and wait until the inscription “Added” ( “Added” / “Connected”), and if the label does not appear – repeat the above steps.
Once you have seen a message “Added” ( “Added” / “Connected”), press the button “AP” and find the previously downloaded TWRP files.
check the box “Auto-reboot” ( “Automatically restart”)
Go into TWRP and sew the file – the no-verity of-opt-the encrypt (it is for the normal operation of TWRP)
All!! On your smartphone Samsung Galaxy S7 established custom TWRP recovery.
Install custom firmware on Samsung Galaxy S7 SM-G930
To install custom firmware on the phone Samsung Galaxy S7 SM-G930 must have of a custom rekaveri TWRP Recovery, if you do no see. Paragraph above.
Download to PC any custom firmware that you like, for example – S7E ECHOE Rom v5 or any other format “.zip”. Then copy the firmware file to your phone. Then turn off the smart phone and boot into custom rekaveri TWRP Recovery (to pinch off the phone power button + up button Thunder + HOME.)
And after installing TWRP Recovery BIOS file:
Go to the item Wipe and select the Advanced Wipe
put checks next paragraphs: “Davlik Cache”, “System , Data”, “Cache”, “Android Secure”.
Making the “Swipe to Wipe”
Go to the Install -> Select the memory, which is custom firmware and select Swipe to confim Flash, begin the installation
After you install the rekaveri point to reboot -system and begin to restart the device.
“Truncated” Done! You have successfully flashed custom firmware! reboot your smartphone.